Categories ArchivesCT Scanning

3D Scanning Technology helps preserve Neil Armstrong’s Spacesuit image

Neil Armstrong's historic Apollo 11 spacesuit has been painstakingly restored by the Smithsonian Museum, with the help of 3D optical scanning and CT scanning. The restoration took place ahead of the 50th anniversary of the Apollo 11 mission launch and used technology unavailable when the Apollo 11 crew flew to the moon in July 1969. The spacesuits worn by Armstrong, Buzz Aldrin & Mike Collins have been kept at the Smithsonian National Air and Space Museum in Washington DC since their return, but time has taken its toll on the historic garments. The restoration work began in 2015, with the team beginning work on the gloves of the suit. X-ray images recorded the suit's condition and allowed the inner parts to be ...

Continue Reading

CT scanning in quality inspection – detecting potential problems standard

Detecting potential problems in the quality and integrity of a part. Here’s an example from our partners at NSI, showing the uses of industrial CT scanning in quality inspection processes to detect potential problems in the quality and integrity of a part. In this case, a small battery has some visible damage to it, which indicates that there might be a potential fault. The case on this battery appears to be swollen with a dome shape to it; not something that you would ordinarily see with these products. This could be a symptom of a larger problem with the battery, which if undetected could cause the battery to leak or burst. Depending on the application the battery is being used with this ...

Continue Reading

BMW using CT scanning system for prototype development standard

Original story in The Engineer magazine BMW Group has revealed that it is using an advanced computed tomography (CT scanning) system for prototype development, production and analysis. Until now, vehicles have had to be dismantled for analysis, but CT scanning allows checks to be carried out with the vehicle completely intact. The new X-ray system is based in the BMW Group Pilot Plant in the Research & Innovation Centre (FIZ) in Munich. Commenting on the system Udo Hänle, BMW’s head of Production Integration and Pilot Plant said: “We can now analyse our prototypes in minute detail without having to dismantle them first. Ultimately, this will enable us to integrate new technologies into vehicles even faster. The use of this state-of-the-art system is ...

Continue Reading

Benefits of CT Scanning for Aerospace standard

Excerpt from an article www.qualitymag.com Aerospace Inspection with CT Scanning Effective quality management has always been crucial within the aerospace industry. Faulty designs and poorly manufactured parts not only lead to wasted resources and loss of profits, but also jeopardise company reputation and can compromise public safety. The quest for quality has also helped push new innovations in aerospace. Whether that is through the greater usage of advanced materials like super alloys to increase aircraft performance and durability, or the adoption of additive manufacturing, enabling weight savings and space optimisation whilst allowing complex designs to be produced. Industrial CT Scanning for Aerospace Inspection Testing has always been a crucial step in the management of quality, but given the value of many parts, destructive tests ...

Continue Reading

Combining CT Scanning with Additive Manufacturing standard

Excerpt from an article www.digitalengineering247.com CT scanning has the ability to provide detailed quality inspection scans of 3D printed parts for many industries. This role in additive manufacturing supplements how CT scanning is already used in reverse engineering activities. Whilst 3D printing enables the production of parts in previously impossible designs, there is a need to inspect them, and that’s where CT scanning comes in. As 3D printing allows the production of complex internal structures, CT scanners provide a unique way to help quality inspect the accuracy of printed parts which will be used in production. Other scanning and metrology techniques are limited to only recording the exterior surfaces of the parts. “We see a lot of interest in printing components because ...

Continue Reading

‘Its an honour to be nominated’ – PES Performance shortlisted for inaugural Digital Awards standard

PES Performance, the sister company to PES Scanning has been shortlisted for Sheffield’s first Digital Awards. A nomination in the ‘Best Use of Digital Technology In Industry’ category recognises the work that the PES team does for clients utilising technology, including 3D scanning, CT scanning, CAD and 3D printing. The award ceremony sponsored by the Sheffield Star will take place on 2 May at Kollider in the city centre. The Star has launched the city’s Digital Awards to recognise how Sheffield’s technology and digital industry continues to grow and to celebrate the people and companies doing great things. The Star has worked with Sheffield Digital and the team at Kollider to create this opportunity to really shout about the city and its ...

Continue Reading

What Are the Benefits of Industrial CT Scanning Services? standard

Industrial CT scanning services use X-ray technology to produce 3D images of the item being scanned. The advantage it has over other 3D scanning methods such as laser scanning or optical scanning is that CT scanning can be used to see the internal details of a part. It is the same technology that has been used for many years in medical imaging. In industry, CT scanning services are typically used for; • Material Analysis • Assembly Verification • Failure Analysis • Internal and External Measurements • Non-Destructive Testing / Inspection • Product Quality Compliance/Screening • Quality Inspection of parts CT Scanning is used in industries including; aerospace, automotive, defence, energy production, and oil & gas. The primary benefits of Industrial CT Scanning services include: Improved product quality Industrial CT scanning services can ...

Continue Reading

What do we do for our clients? image

What do we do for our clients?

PES Scanning is part of Performance Engineered Solutions (PES) Ltd, a high-performance engineering design services business, with a multi-disciplinary team of design and performance engineers. The owners of PES Performance- Dan Fleetcroft and Mike Maddock, spoke about their business and what they do to meet and exceed clients wants and needs, in an interview with the Engineering Employers Federation (EEF). Dan started the interview by saying, “Fundamentally it’s understanding the challenge. We are predominately client driven and that usually means someone has a problem that needs fixing. The key aspect is understanding what that problem is and what the best solution is going to be for the client. Sometimes the most successful project comes from educating your client in terms of what ...

Continue Reading

10 ways 3D scanning and measurement can assist your projects image

We offer a range of accurate techniques that can deliver a true and accurate representation of your products, plant and equipment; through the use of 3D scanning and measurement. Digital Archiving– Could assist your industry project by producing 3D digital records for the conservation of all pre-digital objects, from past products to components of machinery. Rapid Prototyping also known as Rapid Manufacturing– This is a quick, reliable and cost-effective way of precise production. It is where a group of techniques are used to quickly put together a scale model of a part or object using CAD data. It can be used for engineering design, tool making, jigs and fixtures, turbines, aerospace, power generation, art and archaeology, consumer products, prototypes ...

Continue Reading

PES Scanning expands engineering design team to meet double digit growth gallery

Engineering solutions company PES Scanning Ltd has further expanded their engineering design team to meet increased client demand. Simon Bainbridge joins the PES Scanning team as Senior Design Engineer from his previous role at Atkins Energy, where he designed mechanical handling equipment for various civil nuclear and defence programmes. Simon started his career at Siemens, working as a R&D design engineer in their metals processing division. On his appointment Simon comments; “What attracted me to PES was the wide variety of projects that they undertake for clients. Currently I’m working on projects in the aerospace, green energy and industrial sectors, including an Innovate UK backed R&D project, which for an engineer is great. It is also good to be part of ...

Continue Reading

This is a unique website which will require a more modern browser to work!

Please upgrade today!