Inspection Reports

We can generate several inspection reports to be part of your quality control system, as a documented aid to manage and control any potential quality issues. See below to find out more information.


Type of report
Overview of report
When to apply the report
Colour map deviation report
The report highlights the variances between the scanned item, and original 2D drawings, CAD models or control pieces using colour mapping to identify deviations.

Quickly identifies the areas that are in or out of tolerance and a system that is easy to monitor.

Provides a 3D model that you can rotate.


Analysing hard to identify tolerances such as surface deviation.

When fast results are required.

When a visual process is required for archiving.

For use on complex or free form shapes.


Cross section analysis report
Compares cross sections of scanned item against  CAD model data.

2D cross section analysis on specified points of the CAD model.

Deviation can be applied in a colour map.


Verification of part thickness cross section as selected.

Specific cross section selection.


Geometric dimensioning and tolerance report
Standard method for comparing scanned item against original 2D drawings or CAD models.

Angularity, concentricity.

Repeatable report with quantifiable results.


When standard tolerance dimensions are required.

Pre-selected dimensions are tracked across multiple parts.

Verify prismatic features built to within tolerance.


Tailored report
We can tailor your inspection reports to your exact requirements and align the outputs of the selected scanning technology.

A range of specific quality inspection reports can be produced.

If you would like to discuss your project and how our solutions can help you, then please call us for a chat at 

+44 (0) 114 321 6375 or contact us.

This is a unique website which will require a more modern browser to work!

Please upgrade today!